2010年8月19日星期四
Juniper SSG 520 通过 Boot Loader升级固件
一、已有条件
SSG 520:
boot loader版本：Saipanloader V1.0.7
firmware screenOS版本：5.4.0
下载的新版本固件：ssg500.6.3.0r4.0
PC机：安装 Cisco TFTP Server，将ssg500.6.3.0r4.0放置到该目录下。PC机ip地址是 192.168.170.210
二、步骤
1、将PC机串口连接SSG 520 Console口，将PC机网口连接SSG520 ethernet0/0，PC机ip地址为192.168.170.210。启动TFTP Server。
2、开启终端工具（如windows hyperterminal），启动SSG 520。终端工具中显示
ScreenOS Saipanloader V1.0.7
Built Mar 19 2009/15:54:12
watchdog_probe, 1132 bus/dev/fn = 0/248 ich = 2640
boot_drive = 80
start1 = 0768, start2 = 3840
Hit 'X' and 'A' to upgrade bootloadermounting FAT16 partition
此时hit 'X' and 'A'
file size = 112
size = 112, sizeof(nvram_rec) = 112
Hit any key to load new firmware
Serial Number []: READ ONLY
BOM Version Number []: READ ONLY
Self MAC Address [0000-0000-0000]: READ ONLYip = 192.168.170.91 svr = 192.168.17
0.210
self_ip_buf = 192.168.170.91, tftp_ip_buf = 192.168.170.210
Firmware File Name [ssg500.6.3.0r4.0]:
Self IP Address [192.168.170.91]:
TFTP IP Address [192.168.170.210]:
IP MASK [255.255.255.0]:
Gateway IP Address [192.168.170.210]:
Saipan motherboard proto 3 or later detected
Probing...[Ethernet0/0 and Ethernet0/1]
Initiating hardware and waiting for link up ...
self_ip = 192.168.170.91, tftp_server_ip = 192.168.170.210
ip = 192.168.170.91 mask = 255.255.255.0 gw = 192.168.170.210 svr = 192.168.170.
210
network_ready = 1
ssg500.6.3.0r4.0
buf_read = 10991, fp->maxposition = 11545327
offset = 0, maxposition = 11545327
11545327 bytes downloaded from tftp server
hdr->magic_number = 81ba16ee, hdr->platform_type = 1700, hdr->cpu_type = 11
Ignore image authentication!
Save to on-board flash disk? (y/[n]/m) Yes，选择Yes
Saving default system image to on-board flash disk...
Program flash (11545327 bytes) f_start = 14536 f_end = 20173
Done
Run downloaded system image? ([y]/n) Yes，选择Yes
loading elf format....
<0x4000000:0x48f5:0x0>
move image from 1001020 -> 4000000, size = 18677
<0x4005000:0xafc000:0x50d8>
move image from 1006020 -> 4005000, size = 11538648
real_entry_addr = 4000000, entry_addr = 4000000
Uncompressing Kernel...
Now booting the kernel
the system has been up for 0 second(s)
the system has been up for 0 second(s)
CPU:GenuineIntel
Version Information:
Extended Family ID = 0
Extended Model ID = 0
Family ID = f
Model = 4
Stepping ID = 9
Processor Type = 0
Brand String = 0
Additional Information:
Brand Index = 0
CLFLUSH Line Size = 64
Initial APIC ID = 0
Feature Information:
FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV
PAT PSE-36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS
HTT TM PBE
Extended Feature Information:
SSE3 MONITOR/MWAIT DS-CPL TM2 CNXT-ID
TLB/Cache Information:
1st-level data cache: 16 KByte, 8-way set associative, 64 byte line size
Data TLB: 4 KByte and 4 MByte pages, 64 entries
Instruction TLB: 4 KByte and 2-MByte or 4-MByte pages, 128 entries
Instruction TLB: 4 KByte Pages, 4-way set associative, 32 entries
2nd-level cache: 256-KB, 4-way set associative, sectored cache, 64-byte line siz
e
Trace cache: 12 K-ooooop, 8-way set associative
No 2nd-level cache or, if processor contains a valid 2nd-level cache, no 3rd-lev
el cache
3: eax = 0, ebx = 0, ecx = 0, edx = 0
4: eax = 121, ebx = 1c0003f, ecx = 1f, edx = 0
eax = 40, ebx = 40, ecx = 0, edx = 0
count = 80000008
Brand String: Intel(R) Celeron(R) CPU 2.53GHz
L1 I Cache: 0K (0 bytes/line), D cache 0K (0 bytes/line)
L2 Cache: 256K (64 bytes/line)
total DRAM size is 1048576 KB
init 0(+100000)
heap 100000(+2bf00000)
iocard 2c000000(+1400000)
packet 2d400000(+800000)
CTRL 2dc00000(+400000)
TASK 2e000000(+12000000)
heap_start = 24ff010, heap_size = 29b00ff0
RCBA = fed1c001
FD = f8ef1
MAP = 1
MAP = 1
bootmap_size = 8000
zone_table[ZONE_TASK].free_pages = 71670, zone_table[ZONE_TASK].num_pages = 7372
8
_fbss = 1cf5000, _end = 24ff000
data_start = 11e2000, data_end = 1cd4000
Juniper Networks, Inc
SSG520/SSG550 System Software
Copyright, 1997-2008
Version 6.3.0r4.0
set_ecb_dcr: not implemented
scan pci 0 devices....
Device found on PCI bus 0:dev_num is 0,vendor id is 0x25888086
Device found on PCI bus 0:dev_num is 1,vendor id is 0x25898086
Device found on PCI bus 0:dev_num is 29,vendor id is 0x26588086
Device found on PCI bus 0:dev_num is 30,vendor id is 0x244e8086
Device found on PCI bus 0:dev_num is 31,vendor id is 0x26408086
scan pci 1 devices....
Device found on PCI bus 1:dev_num is 0,vendor id is 0x03298086
scan pci 2 devices....
Device found on PCI bus 2:dev_num is 2,vendor id is 0x90001148
Device found on PCI bus 2:dev_num is 3,vendor id is 0x90001148
cav_bar_init: called. Dump BARs PCI conf regs --
cav_bar_init: called. orig reg setting: PCI 10 = 0000e801, 18 = 0000e401
Load Manufacture Information ... init manufacture info Done
cfcard ready.
Install module init vectors
Changed to l3 mode
IO_CARD_BUF_START: 0x2c000000
ssg Searching GbE devices...
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 2
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 3
Total on-board GbE devices found 2
Total adapter GbE devices found 0
Install modules (011e2000,01cd4000) ...
PPP IP-POOL initiated, 256 pools
Initializing DI 1.1.0-ns
System config (743 bytes) loaded
Done.
Load System Configuration .....................
Unsupported command - set zone "VLAN" block
................................
Unsupported command - set dl-buf size 4718592
...........Done
system init done..
Load NVRAM Information ... (5.4.0)Done
login: ethernet0/0 interface change physical state to Up
login:
启动后为ScreenOS 6.3.0 r4
SSG 520:
boot loader版本：Saipanloader V1.0.7
firmware screenOS版本：5.4.0
下载的新版本固件：ssg500.6.3.0r4.0
PC机：安装 Cisco TFTP Server，将ssg500.6.3.0r4.0放置到该目录下。PC机ip地址是 192.168.170.210
二、步骤
1、将PC机串口连接SSG 520 Console口，将PC机网口连接SSG520 ethernet0/0，PC机ip地址为192.168.170.210。启动TFTP Server。
2、开启终端工具（如windows hyperterminal），启动SSG 520。终端工具中显示
ScreenOS Saipanloader V1.0.7
Built Mar 19 2009/15:54:12
watchdog_probe, 1132 bus/dev/fn = 0/248 ich = 2640
boot_drive = 80
start1 = 0768, start2 = 3840
Hit 'X' and 'A' to upgrade bootloadermounting FAT16 partition
此时hit 'X' and 'A'
file size = 112
size = 112, sizeof(nvram_rec) = 112
Hit any key to load new firmware
Serial Number []: READ ONLY
BOM Version Number []: READ ONLY
Self MAC Address [0000-0000-0000]: READ ONLYip = 192.168.170.91 svr = 192.168.17
0.210
self_ip_buf = 192.168.170.91, tftp_ip_buf = 192.168.170.210
Firmware File Name [ssg500.6.3.0r4.0]:
Self IP Address [192.168.170.91]:
TFTP IP Address [192.168.170.210]:
IP MASK [255.255.255.0]:
Gateway IP Address [192.168.170.210]:
Saipan motherboard proto 3 or later detected
Probing...[Ethernet0/0 and Ethernet0/1]
Initiating hardware and waiting for link up ...
self_ip = 192.168.170.91, tftp_server_ip = 192.168.170.210
ip = 192.168.170.91 mask = 255.255.255.0 gw = 192.168.170.210 svr = 192.168.170.
210
network_ready = 1
ssg500.6.3.0r4.0
buf_read = 10991, fp->maxposition = 11545327
offset = 0, maxposition = 11545327
11545327 bytes downloaded from tftp server
hdr->magic_number = 81ba16ee, hdr->platform_type = 1700, hdr->cpu_type = 11
Ignore image authentication!
Save to on-board flash disk? (y/[n]/m) Yes，选择Yes
Saving default system image to on-board flash disk...
Program flash (11545327 bytes) f_start = 14536 f_end = 20173
Done
Run downloaded system image? ([y]/n) Yes，选择Yes
loading elf format....
<0x4000000:0x48f5:0x0>
move image from 1001020 -> 4000000, size = 18677
<0x4005000:0xafc000:0x50d8>
move image from 1006020 -> 4005000, size = 11538648
real_entry_addr = 4000000, entry_addr = 4000000
Uncompressing Kernel...
Now booting the kernel
the system has been up for 0 second(s)
the system has been up for 0 second(s)
CPU:GenuineIntel
Version Information:
Extended Family ID = 0
Extended Model ID = 0
Family ID = f
Model = 4
Stepping ID = 9
Processor Type = 0
Brand String = 0
Additional Information:
Brand Index = 0
CLFLUSH Line Size = 64
Initial APIC ID = 0
Feature Information:
FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV
PAT PSE-36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS
HTT TM PBE
Extended Feature Information:
SSE3 MONITOR/MWAIT DS-CPL TM2 CNXT-ID
TLB/Cache Information:
1st-level data cache: 16 KByte, 8-way set associative, 64 byte line size
Data TLB: 4 KByte and 4 MByte pages, 64 entries
Instruction TLB: 4 KByte and 2-MByte or 4-MByte pages, 128 entries
Instruction TLB: 4 KByte Pages, 4-way set associative, 32 entries
2nd-level cache: 256-KB, 4-way set associative, sectored cache, 64-byte line siz
e
Trace cache: 12 K-ooooop, 8-way set associative
No 2nd-level cache or, if processor contains a valid 2nd-level cache, no 3rd-lev
el cache
3: eax = 0, ebx = 0, ecx = 0, edx = 0
4: eax = 121, ebx = 1c0003f, ecx = 1f, edx = 0
eax = 40, ebx = 40, ecx = 0, edx = 0
count = 80000008
Brand String: Intel(R) Celeron(R) CPU 2.53GHz
L1 I Cache: 0K (0 bytes/line), D cache 0K (0 bytes/line)
L2 Cache: 256K (64 bytes/line)
total DRAM size is 1048576 KB
init 0(+100000)
heap 100000(+2bf00000)
iocard 2c000000(+1400000)
packet 2d400000(+800000)
CTRL 2dc00000(+400000)
TASK 2e000000(+12000000)
heap_start = 24ff010, heap_size = 29b00ff0
RCBA = fed1c001
FD = f8ef1
MAP = 1
MAP = 1
bootmap_size = 8000
zone_table[ZONE_TASK].free_pages = 71670, zone_table[ZONE_TASK].num_pages = 7372
8
_fbss = 1cf5000, _end = 24ff000
data_start = 11e2000, data_end = 1cd4000
Juniper Networks, Inc
SSG520/SSG550 System Software
Copyright, 1997-2008
Version 6.3.0r4.0
set_ecb_dcr: not implemented
scan pci 0 devices....
Device found on PCI bus 0:dev_num is 0,vendor id is 0x25888086
Device found on PCI bus 0:dev_num is 1,vendor id is 0x25898086
Device found on PCI bus 0:dev_num is 29,vendor id is 0x26588086
Device found on PCI bus 0:dev_num is 30,vendor id is 0x244e8086
Device found on PCI bus 0:dev_num is 31,vendor id is 0x26408086
scan pci 1 devices....
Device found on PCI bus 1:dev_num is 0,vendor id is 0x03298086
scan pci 2 devices....
Device found on PCI bus 2:dev_num is 2,vendor id is 0x90001148
Device found on PCI bus 2:dev_num is 3,vendor id is 0x90001148
cav_bar_init: called. Dump BARs PCI conf regs --
cav_bar_init: called. orig reg setting: PCI 10 = 0000e801, 18 = 0000e401
Load Manufacture Information ... init manufacture info Done
cfcard ready.
Install module init vectors
Changed to l3 mode
IO_CARD_BUF_START: 0x2c000000
ssg Searching GbE devices...
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 2
On-board GbE device found, VID = 0x1148, DID = 0x9000 Bus 2, Slot 3
Total on-board GbE devices found 2
Total adapter GbE devices found 0
Install modules (011e2000,01cd4000) ...
PPP IP-POOL initiated, 256 pools
Initializing DI 1.1.0-ns
System config (743 bytes) loaded
Done.
Load System Configuration .....................
Unsupported command - set zone "VLAN" block
................................
Unsupported command - set dl-buf size 4718592
...........Done
system init done..
Load NVRAM Information ... (5.4.0)Done
login: ethernet0/0 interface change physical state to Up
login:
启动后为ScreenOS 6.3.0 r4
标签： Boot Loader, Firmware upgrade, Juniper SSG 520
// 发贴者：放牛娃的春天 @ 八月 19, 2010 
订阅 博文 [Atom]